Nitro Chicken Top Fuel Hydro Boat Bad Ass Diecast

Nitro Chicken Top Fuel Hydro Boat Bad Ass Diecast in Red w/ yellow flames. 1/18 Approximately 13 ½” Long and 5 ½” wide. Actual boat is approximately 20’ long. Drag Boats come with Stand enclosed in the box. Clear round plastic tool in top of box is used to open side magnetic hatch panels to show foam, batteries & air bottles. Cowl behind Capsule is magnetic and is removable to show the W-Drive Twin Propeller Drive Assembly. The Capsule is also removable, once the Cowl is removed place fingers on the rear of Capsule and lift upward while not grabbing the side loops. The Capsule has a functional opening Canopy (F-16 Fighter Canopy) displaying seat belts, oxygen system, latches, steering wheel & throttle. With Capsule in the boat the Steering function can be seen by turning the Steering Wheel, do not try to turn Steering from the Rudder. The TFH Engine has opening butterflies, fuel lines, blower restraint safety blanket, twin MSD Mags, MSD Pro Mag 44 Boxes & Coils, oil pump, Bellhousing, port nozzles, starter, fuel shut off and barrel valve. Note top Mag has black plug wires and bottom Mag has red plug wires and both Mags are in time. Twin Prop Assembly on the bottom of the Hull. Functional Rudder Assembly, Fuel tank, fuel hose and engine oil breather system and twin Parachute assembly w/safety straps. The Hull is a Water Craft by Wolfie, the most common and currently the fastest Hull racing. All six boats are Water Craft Hulls. Each Hull has a brass serial number plate on the bottom of the hull with consecutive serial numbers from 001 to 1,250.